iBike Newton is more than just “the next generation of
cycling power meter technology”.
It’s a complete redesign of power measurement reflecting the input and “wish list” features of thousands of cyclists world-wide. And true to iBike technology, there’s no need to own an extra set of wheels or cranks.
Simply, it delivers the best in accuracy, and simplicity at an affordable price.
Learn more about how iBike power measurement works.
See how the iBike Newton compares to other power meters
Delivering Power Readings
from Direct Force Power Meters
On October 2, 2012, iBike introduced the powerful iBike OS2 operating system. The iBike Newton with OS2 delivers significantly improved accuracy, consistency and smoothness, so much so that Newton performance is virtually indistinguishable from direct force power meters in every way except price.
Processing 50% Faster
OS2’s Physics Engine has been completely re-coded to take full advantage of the responsiveness and resolution of these sensors
and to reduce data processing time. With OS2 data is processed 50% faster, sensor resolution is greater, and signal flow through the code is faster.
Fast Twitch Response
With OS2’s incredible “Fast Twitch” response,
the iBike Newton also excels in short intervals.
This is great news for sprinters and others who
are particularly concerned about power meter
response for short intervals of 30 seconds or less.
read more about OS2
The Data Says It All
Second-by-second, the Newton’s accuracy and consistency is amazing. In a series of 50 second intervals, the average watts during the intervals measured by the Newton (white) vs DFPM (green) agree within the +/- accuracy limits of the two power meters, and both power meters responded nearly identically to second-to-second fluctuations.
Learn more about Bike OS2
Read the Florida Cycling Magazine review
Quick Start Set Up
We know you want to get out and get riding! So we made calibration virtually non-existent. No need to push buttons on the iBike "Setup" screens just use your computer and iBike Isaac software to enter your info then click to transfer all your setup info to your iBike Newton! No coast downs or wind calibrations.
Completely Enclosed, Fully integrated Wireless Unit
The ANT+ receiver are inside Newton - increasing reliability & providing superior water resistance. Have more than one bike? With Newton, extra mounts for your other bikes are less expensive— saving as much as 65% compared to prior mounts.
Switching from bike to bike has never been easier or more affordable.
Conveniently place a 2nd mount and sensors on your additional bike and all you need to do is slide your iBike Newton onto the mount when you’re ready to ride. Your iBike Newton will store up to 4 profiles for 4 separate bikes!
Larger, Easy to Read Screen
iBike Newton’s easy "one-touch" screen change allows you to view the data you want when you want it providing 3 lines of on-screen data. All in a screen that’s 30% larger compared to previous iBike units.
iBike remains the only fully upgradeable power meter on the market. You can upgrade your iBike Newton to an iBike Newton PowerStroke+ at any time.
Available in Black or White;
Mac and PC compatible
See how the iBike Newton compares to other power meters
The iBike Newton delivers enhanced data reliability with cutting edge technology. Latest-generation wind, barometer and accelerometer sensors have improved and temperature performance; the wind port includes new CossfinTM design that delivers improved accuracy in crosswind and drafting and the new, optional Newton remote wind sensor (RWS) is sturdier and easier to install and use.
Higher Capacity, Fully Rechargeable, Winter-Ready Battery
With twice the ride memory storage of iBike GEN III the iBike Newton is ready to roll!
Weather can’t stop it - the iBike Newton battery is fully enclosed so, no worries about water leaks; and this cold-weather resistant battery has outlasted any rider in 20 degree weather.
Battery lasts up to 20 hours of ride time and the rechargeable battery is built in and the battery recharges from your computer USB port.
You expect power numbers from your cycling power meter.
In fact, your average power meter typically delivers that along with cadence, speed, time, heart rate, time, and other basic data.
But because of its patented, built-in sensors, with the iBike Newton line you get so much more!
Current, average and maximum:
Wind Speed, Hill Gradient, Altitude, and Temperature
Calories, Kilojoules, Elevation Gain, Trip Time, Trip Distance and Hours Logged
Built-In Fitness Tests, Personalized Interval Training And More!
Power and Cycling Performance Measurements are available on-screen in Metrics or English Units.
View the full list of iBike Newton features.
Looking to take your ride to top-of-the line performance?
iBike Newton PowerStroke+
offers the same state-of-the art technology, exclusive features and measurements of the iBike Newton PLUS
the new iBike PowerStroke technology, indoor training capabilities and a virtual “wind tunnel at your fingertips”.
EXCLUSIVE to iBike: A revolutionary way to measure, evaluate & your pedaling so you can quantify potential for improved cycling performance!
Check out the new iBike PowerStroke technology
Pre-Installed iBike Indoor Trainer Firmware upgrade allowing you to use your iBike to measure power on indoor training rides as well as outdoor rides.
Wind Tunnel Measurements
EXCLUSIVE Power, Aerodynamic, and Cycling Performance Measurements:
Snapshot Drag CoefficientTM
Want to determine your best riding position to beat the wind, or test the aerodynamic impact of changing your gear or equipment?
iBike NEWTON+ displays a point-in-time aerodynamic drag coefficient (CdA) on your screen whenever you coast. The lower the CdA number , the more streamlined you are. Try out different riding positions or change gear and let iBike NEWTON+ quantify the aerodynamic benefits.
How much time do you pick up when you go into a tuck?
How much time does it cost you when you sit up to drink?
iBike NEWTON+ measures (in seconds) the cumulative amount of time you've gained (or lost) due to changes in your ride position or equipment during your solo ride and reports it in real time on your screen. These are just some of the many questions that the exclusive Time Advantage feature answers.You can't answer these questions in a wind tunnel but you can answer them with your iBike NEWTON+.
Continuous Drag CoefficientTM**
Looking to establish your optimal combination of aerodynamic positioning and equipment to maximize power? Want to know instantly if you’re deviating from your optimum ride position?
iBike NEWTON+ displays instant, continuous aerodynamic drag coefficient feedback on your screen even while pedaling! When you ride with both your iBike NEWTON+ and a direct-force power meter sensor, your iBike NEWTON+ provides information that enables you to find your optimal combination of aerodynamics and power.
**Continuous Drag Coefficient and Time Advantage require the use of both an iBike NEWTON and a direct force wireless power sensor communicating with ANT+Sport technology (not included).
iBike's Isaac software is the brains behind getting the most out of your NEWTON. Allowing you to manage your calibration, adjust your data and view your results all from your Mac or PC.
With the iBike NEWTON, the built-in mini USB port serves both as the computer connection and as the recharge port for the internal rechargeable battery so downloading your ride file is a snap.
iBike Newton includes a built-in cycling fitness assessment that allows you to test and re-test your cycling fitness so you can monitor your progress and adjust your training.
Based on your fitness score and your personal fitness objectives (weight-loss, cardio, or strength), your iBike NEWTON provides goal-specific interval training workouts customized to your fitness level.
Standard: Dual Mount
The low profile Dual Mount can be used as either a handle bar or stem mount.
Optional: Steer Tube Mount (pefrect for TT/Tri bike set ups)
Looking to move your iBike off of your handle bar?
The optional Steer Tube Mount is the way to go.
Setting up a TT or Tri Bike? Choose the Steer Tube Mount option and add a Newton Remote Wind Sensor for best results.
Own more than one bike?
And extra bike mount or mount & sensors kit may be what you need to take full advantage of iBike’s bike-to-bike portability.
Looking to include heart rate in your training measures?
You’ll see the data on-screen and in ISAAC. iBike’s optional ANT+ heart rate monitor can be purchased at a discount when you purchase your iBike Newton or iBike Newton PowerStroke+ or purchase the heart rate strap separately at a later date.
Ride a TT Bike?
iBike Newton or iBike Newton PowerStroke+ with its standard mount and optional RWS (remote wind sensor) deliver the perfect set up.
Want to train Indoors & out?
While this upgrade is pre-installed in the iBike Newton or iBike Newton PowerStroke+ owners can also use their iBike Newton to measure power on indoor trainer rides with the iBike Indoor Trainer Firmware upgrade.
Want to ride with your Garmin & an iBike Newton?
Want to read data from your new Trek Madone 6 series bicycle ANT+ wireless sensors?
With the new iBike GT firmware upgrade you can!
Already own an iBike GEN I, GEN II or GEN II (iSport, iPro, or iAero)?
You can trade it in for a NEW iBike NEWTON AND get $100 refund when you return your iBike GEN I, II, or III!
Trade in for an iBike NEWTON
Trade in for an iBike NEWTON POWERSTROKE+